| ITEM |
OSC-1030 |
| CRT |
Configuration and Useful Screen |
6-Inch Rectangular Screen with Internal Graticule:8×10div(1div=1cm) Marking for Measurement of Rise Time 2 mm Subdivisions Along Central Axis. |
| Accelerating Potential |
+1.9KV Approx.(Ref.Cathode) |
| Phosphor |
P31(Standard) |
| Focussing |
Possible(With Auto-Focus Correction Circuti) |
| Trace Rotation |
Provided |
| Intensity Control |
Provided |
| Z-AXIS INPUT (INTENSITY MODULATION) |
Input Signal |
Positive Going Signal Decreases Intensity +5 Vp-p or More Signal Cases Noticeable Modulation at Normal Intensity Settings |
| Bandwidth |
DC to 2 MHz(-3 dB) |
| Coupling |
DC |
| Input Impedance |
20kΩ - 30kΩ Typical |
| Maximum Input Voltage |
30V(DC+Peak AC) |
| VERTICAL DEFLECTION |
Bandwidth
(-3dB) |
DC Coupled |
DC to 30 MHz Normal , DC to 10 MHz Magnified |
| AC Coupled |
10 Hz to 30 MHz Normal,10 Hz to 10 MHz Magnified |
| Modes |
CH1,CH2,DUAL,ADD,ALT,CHOP |
| Deflection Factor |
5mV/div to 5V/div in 11 Calibrated Steps of A 1-2-5 Sequence Continuously Variable Between Steps at Least 1:2:5 |
| Accuracy |
Normal:±3%,Magnified,±5% |
| Input Impedance |
1MΩ in Parallel with Approx.30pF |
| Maximum Input Voltage |
Direct 400 V (DC+ Peak AC) ,with Probe : Refer to Probe Specification |
| Input Coupling |
DC- GND -AC |
| Rise Time |
11.67 ns or Less (35ns or Less:×5MAG) |
| CH1 Out |
20 mV/div into 50Ω:DC to 10 MHz(-3dB) |
| Polarity Inversion |
CH2 Only |
| HORIZONTAL DEFLECTION |
Display Modes |
Normal , X-Y,×10,Variable |
| Time Base |
0.1μs/div to 0.2s/div in 20 Calibrated Steps.1-2-5 Sequence. Uncalibrated Continuous Control Between Steps at Least 1:2:5 |
| Sweep Magnification |
10 Times (Maximum Sweep Rate: 10 ns/div) |
| Accuracy |
±3%, ±5% (0 ℃ To 40 ℃), Additional Error for Magnified ±2% |
| TRIGGER SYSTEM |
Modes |
AUTO, NORM, TV-V, TV-H |
| Source |
CH1, VERT (CH1, CH2), EXT, LINE |
| Coupling |
AC |
| Slope |
+ or - |
| Sensitivity and Frequency Auto (30Hz or More), Norm |
OSC-1030
INT
EXT |
DC-2MHz
0.5div
0.2Vp-p |
2MHz-20MHz
1.5div
0.6Vp-p |
21MHz-30Mhz
2.0div
0.6Vp-p | |
| TV-V, TV-H |
At Least 1 div or 1.0 Vp-p |
| External Trigger Input Impedance |
1MΩ (In parallel with Approx.25pF) |
| Max Input voltage |
400V(DC+Peak AC) |
| X-Y OPERATION |
X-Axis |
(Same as CH1 Except for The Following) Deflection Factor : Same as That of CH1 Accuracy : ±5% |
| Y-Axis |
Same as CH2 |
| X-Y Phase Difference |
3° or Less (At DC to 50 KHz) |
| CALIBRATOR |
Prebe Adjustment |
1 KHz (±20%) Frequency, 0.5V(±20%) Square Wave Duty Ratio: 40-60% |
| POWER SUPPLY |
Voltage Range |
| Voltage Range |
Fuse (250V) |
| UL198G |
IEC127 |
| 115V/AC |
1.25AL |
F1.25AL |
| 230V/AC |
0.63AL |
F0.63AL | |
| Frequency |
50/60 Hz |
| Power Consumption |
Max 45 W |
| PHYSICAL CHARACTERISTICS |
Weight |
8.2kg |
| Size |
370mm(W)×137mm(H)×416mm(D) |
| ENVIRONMENTAL CHARACTERISTICS |
Temperature |
Temperature Range for Rated Operation: +10℃ to +35℃(+50℉ to +95℉)
Max Ambient Operating Temperature: 0℃ to 40℃(+32℉ to +104℉)
Max Storage Temperature: -20℃ to +70℃(-4℉ to +158℉) |
| Humidity |
Range for rated Operation: 45% To 85% RH/Max
Ambient Operating Humidity :35% To 85%RH |